Characterization of flocculent suspensions based on mathematical modelling of batch

Authors

  • Antônio Santos Silva Universidade Federal de Sergipe
  • Pedro Leite Santana Universidade Federal de Sergipe
  • Rogério Luz Pagano Universidade Federal de Sergipe
  • Edilson de Jesus Universidade Federal de Sergipe
  • Carlos Philipe Silva Rocha Universidade Federal de Sergipe

Keywords:

flocculent suspensions, degree of floculation, batch settling tests

Abstract

This work using mathematical modeling based on batch settling tests for free sedimentation and transition regions, addresses the characterization of flocculent suspensions by equations resulting from the comparison of two velocities as functions of porosity that transfers information from velocity determined by the mathematical model to another one in form of power function with a new base, which in the initial porosity is velocity function type Richardson and Zaki modified to include the degree of flocculation. The mathematical model velocity refers to solid particles in the transition region, and it is given by an equation involving free settling velocity, acceleration wave velocity and initial porosity. The characterization parameters, including the initial porosity, obtained from the equations resulting from the comparison are determined using the free settling velocity and acceleration wave velocity, which are determined directly from experimental data involving descending interface height versus time. Thus, characterization is performed using the results of a single batch settling test for each initial concentration. The results, such as the degree of flocculation, floc density, Stokes’ velocity and floc diameter are consistent with the literature data

Author Biographies

Antônio Santos Silva, Universidade Federal de Sergipe

Departamento de matemática. Modelagem matemática

Pedro Leite Santana, Universidade Federal de Sergipe

Departamento de Engenharia Química. Modelagem e Simulação

Rogério Luz Pagano, Universidade Federal de Sergipe

Departamento de Engenharia Química. Modelagem e Simulação.

Edilson de Jesus, Universidade Federal de Sergipe

Departamento de Engenharia Química. Processos Químicos

Carlos Philipe Silva Rocha, Universidade Federal de Sergipe

Bolsista em Iniciação Tecnológica, Departamento de Engenharia Química, Universidade Federal de Sergipe.

Published

2013-07-19

How to Cite

Silva, A. S., Santana, P. L., Pagano, R. L., de Jesus, E., & Rocha, C. P. S. (2013). Characterization of flocculent suspensions based on mathematical modelling of batch. Scientia Plena, 9(5). Retrieved from https://scientiaplena.emnuvens.com.br/sp/article/view/1357

Most read articles by the same author(s)

1 2 > >>